Ferrules,Trim Rings, Buttons, Winding Checks, Butt Caps
-
Duplon Collars
Duplon Collars to fit Fuji DPS 18 & 20 Reel seats. These Collars are sold in pairs to match the OD of the Hood ( fixed end) and the screw end. The bore size will strech.
FROM: £2.00View Item -
Ferrule
FERRULES these are high quality brass ferrules that have been chrome plated. Ideal for all types of rod building.
FROM: £1.75View Item -
Fuji Rubber Butt Cap (Gimbal)
Fuji Rubber Butt Caps , this butt cap has a Cross moulded into the rear end of it to accommodate fighting pads. 45 mm long 25 mm diameter at the small end 33 mm diameter at the butt end. Available with two ID 19 mm & 22 mm
FROM: £3.24View Item -
RCP Rubber End Cap
The RCP "Rubber End Cap" fits over the Butt of a rod ideal for boat or Sea rods Bore size 24 mm
ONLY: £1.80View Item -
Aluminium Winding Checks
Aluminium winding check fills the gap between the handle and the rod blank. Available in two colour finishes. Clear or Nickle silver colour.
FROM: £1.32View Item -
Butt Cap
Solid machined aluminium Butt cap with rubber end. Ideal to finish off the end of Salmon,Carp, Spinning rods etc.
FROM: £10.80View Item -
Alps Winding Checks
Thres ALPS winding Checks are made from Aluminum finihed in Gloss Black Finish. Each one 8 small part drilled holes around the edge that give an attractive finish.
FROM: £4.00View Item -
Stainless Steel Winding Checks
These Stainless Steel Winding Checks can be used in front of Duplon, Reel Seats, Cork etc to give a high class finish. Available in five bore sizes 12, 14, 15, 16, & 17 mm
FROM: £2.81View Item -
Stainless Steel Trim Rings/Collar
These are Solid Stainless Steel trim rings/Collars are designed to fit into either end of Fuji a DNPS size 20 reel seat. These are available in six bore sizes 13,14 ,15,16 ,17 & 18mm Diameter
FROM: £3.58View Item -
Stainless Steel Butt Cap
Solid Stainless Steel Butt Cap ideal to finish off the butt of any rod. Head Dia 19 mm Stalk Dia available in three sizes 11.5, 12.5 & 13.5 mm
FROM: £3.58View Item -
FCA carbon Arbor / spacers
These inserts are extreamly light and anr made to pack out a reel seat to the blank. They can be easly sanded down or the bore can be drilled out to fit the blank.
FROM: £1.10View Item -
Fuji Rubber Butt cap
Fuji Rubber butt cap. Ideal to finish off any rod handle.
FROM: £2.65View Item -
GC Gimbal
GC Fuji Gimbal that fits onto the butt of a rod. Has a Cross in it that fits into fighting harnesses. Made from Glassd reinforced Nylon. available in two sizes. for Gimbal cover see RBC-GC
FROM: £7.15View Item -
Decorative Bands
Brass Bands that have been Chrome plated. these bands can be glued on the length of the rod blank to give an effective finish.
FROM: £0.50View Item -
Lock Nuts
Threaded Lock nuts designed to fit Fuji type reel seats. For use on Carp, Cat fish and Sea rods where large reels are used, they really lock the reel seat up. Available in Black or Titanium anodised finish
FROM: £2.85View Item -
Plastic End Button
Plastic End Button ideal to finish the end of rod.Available in two head sizes. small 19mm dia Large 25mm dia
FROM: £0.52View Item -
Plastic Winding Checks
Light weight black plastic winding checks. In sizes 6mm to 19mm
FROM: £0.25View Item -
Fuji RBC-GC Gimbal Cover
RBC-GC Soft Rubber Gimbal Cover That fits over the GC Gimbal.
FROM: £4.60View Item -
Threaded Butt Cap
Aluminum butt cap black finish. Butt cap has a threaded hole 3/8 BSF this can accomadate threaded rubber butts , ground spikes etc. We sell a rubber button to fit this see RB.SI OD 28 mm tapering down to 21 mm . ID open end 24mm x length 37mm
ONLY: £2.50View Item -
Screw In Rubber Button
Rubber Button with a 3/8"BSF Thread. This button screws into our TBC3/8" Threaded Butt cap. Used on salmon rods OD 31 mm x 16 mm long
ONLY: £2.07View Item
1
