Corks, Cork Products & Fighting Butts
-
Cork Butt
Cork / cork composite butt. Can be used to finish Spinning handles , Salmon Handles or Match handles Size 66 mm long 35 mm at the large end tapering down to 25 mm with a bore 20 mm
ONLY: £2.75View Item -
RodDancer Pit Paste
RodDancer Pit Paste Superior Cork-Filling Paste Available in 1oz sizes
ONLY: £7.20View Item -
Cork Ring (COPANO)
COPANO Cork Ring 32mm diameter x 1/2 inch thick (12 mm) with a 1/4 inch (6 mm) bore. motled colour of dark and light brown.
ONLY: £2.75View Item -
Cork Rings (BURNT)
Burnt cork ring 32mm diameter x 1/2 inch (12 mm ) thick with 1/4 inch (6 mm) bore. Dark brown colour.
ONLY: £2.75View Item -
CORK RINGS (LAGUNA)
LAGUNA Cork Ring 32 mm diameter x 1/2 Inch (12 mm) thick with 1/4 inch (6 mm ) bore. motled drown finish.
ONLY: £2.75View Item -
Rubberized Cork Ring
Rubberized Cork Ring 1 1/4 inch Diameter x 1/2 inch thick with 1/4 inch hole for adding to end of handles.
ONLY: £0.96View Item -
Full Wells Cork
Full Wells Cork Shape 190mm X 28mm Nominal diameter Bore 8.5 mm
ONLY: £12.25View Item -
Half Wells Cork
Half Wells Shape We have two versions of this shape cork handle , the larger is for heaver rods#5 class and above, the lighter slimmer version is for lightweight rods # 1 to 6 Heavy 30 mm dia at reel end, 21 mm diameter at front x 180 mm long bore 8 mm
FROM: £12.25View Item -
Full Length Cork
Super grade cork 500 mm (19 1/2"inches) Long 25 mm diameter ( 1" Dia) with a tapered bore. available in 4 bore sizes. These corks are ideal for Spinning, Carp and match rods.
FROM: £25.54View Item -
Cork Salmon Handle
Cork salmon handle. This is made up of 4 sections, so you can ream / sand them to fit your blank. 27mm od x 150mm x 14mm bore Parallel 27mm od x 150mm x 14mm bore parallel 27mm od x 95mm x 8mm bore fore grip 27mm od x 95mm x 8mm bore rear flare
ONLY: £27.10View Item -
Match Cork Handles
This cork match handle is made up from two corks 5"parallel & 2" flare. this gives you the flexibility to make a handle to suit. ie could have a reel seat in between the cork,or you could have a mix of cork & Duplon. 5 inch Parallel is 25mm OD...
FROM: £2.56View Item -
Maniform Cork Handle
The MANIFORM ergonomic fly rod grip, offers unrivalled comfort, and reduces strain on the tendons & forearm, especially benifical for anglers who have sustained injury or disability. Bore size 8 mm Grade Super
ONLY: £13.28View Item -
Spinning Rod Cork sets
Spinning Rod Handle Corks. These corks are made for spinning rods and fit either side of a reel seat. 350 mm long x 25 mm dia with a flared end and tapered bore. The Fore Grip section is 100 mm long and has a tapered profile Made to fit a Fuji DPS 17 and...
FROM: £30.64View Item -
1/2 Inch Cork Ring
EXOTIC CORK BURNT CORK RINGS 1/2 inch thick x 1 1/4 inch OD with 1/4 inch hole ( 12mm x 32mm with 6mm hole)
ONLY: £2.75View Item -
Cork Rings
High Quality cork rings size 1.25"Dia X 0.500" thick with a bore 6mm
FROM: £1.94View Item -
Cork Ring W9
Cork Ring "A"Grade size 1.125"Diameter X 5/8" wide with Bore 8.5mm approx
ONLY: £0.64View Item -
Cork Rings - large bore
High Quality cork ring bored out to 19mm Dia so that it will fit direct onto the base of most reel seats. size 31mm OD X 12.5mm thick 19mm bore
ONLY: £1.94View Item -
Cork Ring Recessed
Cork Ring that has been bored out and had a cut out in it to take flared reel seat hoods size 31mmOD X 12.5mm thick X 19mm bore
ONLY: £1.63View Item -
Cork Rings Solid
Solid cork ring ideal for finishing ends of rod butts. size 1.25"x 0.500" thick
ONLY: £2.02View Item -
REC cork rings
Cork Rings by REC to fit the RSLS & RSLL reel seat.
FROM: £4.25View Item
